Profile Sheets

prof

UR profiled sheets offers architects and designers a range of choices for roof and wall cladding for industrial, commercial and agricultural buildings. The Single skin sheets are available in variety of thickness, finishes and materials.

 

The main purpose of these sheets is to protect the building interiors from the external environment by providing a secure shell. Profile cladding provides a neat and attractive building appearance. It can also be curved to give additional design flexibility at the eaves and ridge.
The advantages of profiled sheets are :
  • They are inexpensive
  • Made to site measurement, eliminating wastage and installation problems.
  • Designed to conciliate high static characteristics with reduced weight.
  • Allows rapid and rational execution.
  • Requires minimum labour for execution.
  • Can be easily dismantled for building transformations.
  • Modifications or Extensions can be done at any time.

UR Profiled Sheet 35/250

Applications:
PCC 35/250 Profile sheets are high quality metal sheets with strong design gives best load bearing capacity, have been conceived to meet design engineers requirements especially for large scale buildings including Govt’ and railway projects. When compared with other similar design sheets it gives much better pull out (wind up lift) results with less number of screws which increase the life of steel building.
General Feature:

Material : Galvalume Steel / Galvanized Steel / Aluminum
Thickness : 0.35mm to 0.70mm thick
Length : 300mm to 12,000mm
Width : Refer data sheet
Colours : Bare Millfinish /Off White/Sky Blue/Royal Blue/ Toarus Blue /Mist Green /Caulfield Green / Brick Red/Sheel Grey

Sectional Applications

Thickness (BMT) Guage 30 28 26 25 24 23 22
mm 0.35 0.40 0.45 0.50 0.55 0.60 0.70
Weight Kg/R.Mtr 3.35 3.83 4.31 4.79 5.27 5.75 6.70
Moment of Inertia CM4 / M Width 3.55 3.06 3.49 3.79 4.15 4.15 5.21
Section Modules  CM4 / M Width 1.35 1.52 1.69 1.82 2.01 2.21 2.59
Ultimate Movement of Resistance KN.M/M Width 0.63 0.61 0.69 0.82 0.90 0.89 1.21
Max. Sheet Length Recommended LM 6 6 8 8 10 10 12

UR Profiled 25/275

PCC 25/275 Profile sheets are high quality metal sheets with most economical design, have been conceived to meet design engineers’ and building contractors requirements in terms of being aesthetically pleasant and absolutely leak proof.

Material          : Galvalume Steel / Galvanized Steel / Aluminum
Thickness      : 0.35mm to 0.70mm thick
Length            : 300mm to 12,000mm
Width              : Refer data sheet
Colours          : Bare Millfinish / Off White / Sky Blue / Royal Blue / Toarus Blue / Mist Green / Caulfield Green / Brick Red / Sheel Grey

Sectional Applications

Thickness (BMT) Guage 30 28 26 25 24 23 22
mm 0.35 0.40 0.45 0.50 0.55 0.60 0.70
Weight Kg/R.Mtr 3.35 3.83 4.31 4.79 5.27 5.75 6.70
Moment of Inertia
CM4 / M Width 3.55 3.06 3.49q 3.79 4.15 4.15 5.21
Section Modules  CM4 / M Width 1.35 1.52 1.69 1.82 2.01 2.21 2.59
Ultimate Movement of Resistance KN.M/M Width 0.63 0.61 0.69 0.82 0.90 0.89 1.21
Max. Sheet Length Recommended LM 6 6 8 8 10 10 12